Nowadays, glass products are becoming increasingly popular among consumers, and with the arrival of spring and summer, the temperature and humidity gradually increase, causing glass to quickly become moldy. So how to identify whether glass is moldy? In fact, the condition of the glass surface can be investigated by visual appearance tracing method and spray wetting method. If there are spots and fogs that can not be wiped off with cloth and water, it is clarified that the glass is moldy now.

Classification of moldy glass conditions

White mist and white spots: slight mold growth may appear on the surface of the glass due to storage time, air humidity, or glass quality issues;

Rainbow: If white mist and white spots are not treated in a timely manner for a long time, they will form a rainbow. The moldy condition only stays on the surface of the glass and does not corrode into the glass;

Sulfur transformation: The appearance characteristics of mold growth on glass are the same as subtle mold growth, but the alkaline mold components on the surface of the glass have now corroded into the inside, which belongs to severe mold growth;

Paper printing: Mold grows on the outside and inside of glass, which is severe mold growth, similar to the condition of sulfur transformation.

Method for removing mold on glass

Glass mold remover, suitable for all fine moldy glass products, such as rainbows and severe mold in the early stages of sulfur transformation and paper printing. Usage: Dip a cleaning cloth or sponge in mold remover, scrub the glass once or twice, and then immediately rinse it with clean water to make the moldy product look new.

Paper wrinkle remover, suitable for glass products that have been moldy for a long time, have paper patterns, and paper prints. Usage: Soak the glass in the original solution for 5-8 minutes, then rinse with clean water to achieve a shiny and new effect.

To make a homemade mold remover, add 2 kilograms of water to a basin, then pour in a small bottle of vinegar and mix well. Place the moldy glass product into the basin and add an appropriate amount of a mixture of water and acetic acid. Shake the bottle quietly for about 1 minute, pour out the water in the bottle, and wash it with clean water again.

Article source: Tempered glass coverwww.yinghuade.com